SG - Standard grade heat shrink sleeves

Highly flexible heat shrink tubing with a shrink ratio of 2:1. Made of flexible polyolefin. Used for wire identification. Markers are supplied on a roll, in a flattened format, on a backing which can also be printed to aid sorting.

Buy

Product characteristics

  • Flame retardant
  • Self-extinguishing
  • Easy to apply
  • Form of a ladder
  • Available widths of 12.5 mm - 25 mm - 50 mm
  • Print is also possible on the foundation (above or below the marker)

Product properties

Shrink ratio
2:1
Continuous operating temperature
from -55 °C to 125 °C
Tensile strength (min.)
10.4 MPa
Elongation at break (min.)
250 %
Minimum shrink temp.
90 °C
Longitudinal change (max.)
-7 %
Material
Flexible polyolefin
Working Temperature
from -55 °C to 125 °C
Print
Thermal transfer

SG-024

  • Diameter after shrinking
    1.2 mm
  • Diameter before shrinking
    2.4 mm

SG-032

  • Diameter after shrinking
    1.6 mm
  • Diameter before shrinking
    3.2 mm

SG-048

  • Diameter after shrinking
    2.4 mm
  • Diameter before shrinking
    4.8 mm

SG-064

  • Diameter after shrinking
    3.2 mm
  • Diameter before shrinking
    6.4 mm

SG-095

  • Diameter after shrinking
    4.75 mm
  • Diameter before shrinking
    9.5 mm

SG-127

  • Diameter after shrinking
    6.4 mm
  • Diameter before shrinking
    12.7 mm

SG-180

  • Diameter after shrinking
    9 mm
  • Diameter before shrinking
    18 mm

SG-254

  • Diameter after shrinking
    12.7 mm
  • Diameter before shrinking
    25.4 mm

SG-381

  • Diameter after shrinking
    19.1 mm
  • Diameter before shrinking
    38.1 mm

SG-508

  • Diameter after shrinking
    25.4 mm
  • Diameter before shrinking
    50.8 mm

We use cookies to provide services at the highest level. Staying on the site means you agree to their recording or use. Learn more